Відео

You guys know nothing 150psi 50cc haave per push so you smart guys are trying to have bigger psi with 50cc 64mm head engine hahahah very good engeniers

Thanks for posting. Very helpful. Do you need to lube the valve stems when re-installing new valves?

That engine looks like a 70cc to me

What an absolute legend!!!

Hello mate. Quick question I have the same quad and is it a 4stroke or 2stroke?

Yes don't use the orange coil it did not like mine and it started to heat my wire harness up

I have a 125 ice Bear ATV and who I got it from tore the wiring apart. I thought it would make more sense to get a new wiring harness and rewire it back to factory but I'm having issues with not getting any spark. I have a three pin plug on the back side of the harness that goes into the brake light that I do not have the brake light and there's a two-pin plug next to it and I have no idea where that goes because there's nothing back there for it. I also have it black wire and the yellow wire with a green line with two clips on each end that I have no idea where it goes to and another two-wire clip. Same color wires. I can send pictures. Just hoping you get this message

Help I can’t get start after ur viedo

anybody know where to purchase the engine stand? cannot seem to find this thing online.

$150 is a steal for that bike, around here people want like $500+ for those bikes not running and beat up plastics/tires.

i dont know if youll see this comment 4 years later, but i have a 110cc motor, i think the same, but i life in europe. so do you know any shop that sells to europe those parts? i love your videos!

27:52 that’s the most real reaction ever. If you dont react like that you have no soul.

Bro comes back every 2 years 😢

Keep up the good work 👍

Hey, we haven’t seen you on UA-cam in a while with videos. I hope that you return soon with new content. Your videos are some of my 2:19 favorites.

what if you already took off te starter wire?

Can you get me a big boy four wheeler

How much torque on the fifth head bolt?

Why can’t the valve lash be done while the head is on the bench?

Is it OK to lap using a cordless drill and rotate in a single direction?

I was just given one of these. Watching ur video. Kinda gives me place to start

Hey man good video.

I need my 450 motor done and I know nothing about mechanical stuff why can't any1 in my area do good engine work

Would a off brand moped be the same 😮

You made a mistake. You did a leak down test without verifying the position of the camshaft. You had it in the wrong position for doing leak down. Look at your timing mark on the cam when you took it apart vs when you put it back together. Crank goes around 2 times for every 1 rotation of the cam. Your problem was not in the intake valve. It was only open because the cam lobe was holding it open. If you rotated the cam 180 it would have closed. Your problem lied in the damaged exhaust valve and the intake being open hid the leak at the exhaust valve.

man that was so cool have one and it can be done thank you so much

Thank you!

Y can't ANY ANYONE TELL OR SHOW HOW TO REPLACE THE STATOR NO ONE WILL TELL ME. Y?

Y can't ANY ANYONE TELL OR SHOW HOW TO REPLACE THE STATOR NO ONE WILL TELL ME. Y?

Bro, can you help a little bit, mine is the same 110cc and the problem is that it doesn't go in reverse, details about the semi-auto gearbox assembly will be much appreciated ❤

Hey look at meeeee. What a prick.

I really appreciate how you know how to talk dirtbike....

Great job on the quick overhaul and wiring diagnosis. Im on a Taotao 107cc that won't crank. when you start tracing power, the wiring harness gets hot after the four function starter switch. Ever run across this before? Thanks

The only question I had revolves around the two yellow wires coming out of the stator. I don't have matching wires on the harness and that is the only part of the video you skipped unbelievable

Put alot in your build and video I enjoyed watching it

Please do a carb clean and tune video

For some reason my stater wires do not match to the wiring harness. On the new stater I have 2 yellow, red, blue, and green all female conectors. On the new harness I have yellow, blue, red, white with male connectors and a green with a female connector. Any idea what's going on there

Does the whole shell need to come off in order to remove the headlight ?

Thank you for this video. I was worried about re doing the wiring. I feel 110% better about wiring everything up. Much appreciated sir. 🙏 👍

You did help me rebuild the top end of my boys buggy , liked and subbed . Thank you

What is the best aftermarket centrifugal clutch that grabs the best? My stock one on my 125 mini jeep slips too much. It a gen 3 Xpro 125 mini jeep with the mid engine.

How much air pressure did you put in the motor??

Good job man... I do believe I'm just gonna get the new head and set the valves and roll with it seem to use less tools messing with them springs.lol😜

thank you for your video, I have the same Quad and I really had a hard time trying to find the body kit,,, thanks for the link.

Clutch cable and throttle cables are routed incorectly

Where can I order the wire set?

Where did you get the engine stand or did you make it because i need one looks like it will come in handy

Where did you get your engine stand ?? Thats a cool set up.

Have a 110cc Pagsta mini chopper

I was wondering what website do you order part’s from?